44 | English
F 016 L81 115 | (7.10.14) Bosch Power Tools
Troubleshooting
Online Support
http://www.bosch-indego.com
Schedule Info Explanation
Schedule Info
Overview of programmed mowing days.
Back
Return to Menu.
Change Schedule
Enter submenu “Select Daily Timer”.
Lock Controls Explanation
Lock Controls
To lock buttons immediately, independent from Auto-Lock.
Unlock Controls
To unlock buttons the entry of the PIN code is required.
Problem Possible Cause Corrective Action
Machine fails to
operate
Possible clogging Check underneath the garden product and clear out as
necessary (always wear protective gloves)
Battery not fully charged Replace garden product in the docking station
Grass too long Increase height of cut
Battery too hot/cold Allow to cool/warm
Isolator key not inserted correctly/fully Fit correctly
Motor starts and
stops immediately
Battery not fully charged Replace garden product in the docking station
Isolator key not inserted correctly/fully Fit correctly
Battery too hot/cold Allow to cool/warm
Increase height of cut
Machine functions
intermittently
Possible internal fault Contact your Bosch Service Centre
Machine leaves
ragged finish
Height of cut too low Increase height of cut
Cutting blade blunt Replace the blade
Possible clogging Check underneath the garden product and clear out as
necessary (always wear protective gloves)
Areas left uncut Time slot not long enough for garden size Increase mowing time slot
Battery duration Contact your Bosch Service Centre
Distance between obstacles surrounded by
perimeter wire is less than 1 m
Increase distance between perimeter wire
Note: Obstacles with a height of more than 6 cm do not
require to be wired
Rough lawn conditions Increase/decrease cutting lane proximity from “mow set-
tings”
Excessive vibra-
tions/noise
Blade nut/bolt loose Tighten blade nut/bolt
Cutting blade damaged Replace the blade
OBJ_BUCH-1573-007.book Page 44 Tuesday, October 7, 2014 12:49 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
