Bosch Indego S+ 500 User Manual

26 | English
Robotic Lawnmower SI
Unit
Indego S 500 Indego S+ 500 Indego M 700 Indego M+ 700
Protection class
/ II / II / II / II
Frequency Hz 50-60 50-60 50-60 50-60
Output voltage (DC) V 24 24 24 24
Protection type IPX7 IPX7 IPX7 IPX7
Weight kg 1.25 1.25 1.25 1.25
A) Depends on cutting height, grass conditions and moisture
B) Internal battery temperature
Noise/Vibration Information
Noise emission values determined according to
EN50636-2-107.
Typically the A-weighted noise levels of the product are:
Sound power level 61dB(A). Uncertainty K=2dB.
Explanation of Figures
Action Figure Page
Accessories
A
339
Delivery scope/unpacking the mower
B
340
Laying out perimeter wire
C
340
Extending perimeter wire
D
341
Laying perimeter wire around new in-
ner object
E
341
Lifting up and carrying the mower
F
342
Setting the height of cut
G
342
SpotMow
H
343
Cleaning
I
343
Maintenance
J
344
Adding a further lawn area
– with additional docking station
(right)
– without additional docking station
(top left)
K
344
Replacing the battery
L
345
Software update
M
346−347
Power supply unit connection
N
348
Installation
With the following QR code, you can view a video on how to
install the mower under www.bosch-diy.com/indego-help.
Alternatively, follow the Installation Guide delivered with the
product.
Check if the perimeter wire is fully pegged to
the ground avoiding any slack lengths of wire.
Any loose wire can be a trip hazard.
Remove stones, loose pieces of wood, wire, live mains
cables and other foreign objects from the cutting area.
Make sure that the cutting area is even and has no ditches,
grooves and steep slopes above 15°/27% that are clear ob-
structions for the mower.
The docking station must be positioned on the wire at an
outer edge of the cutting area. It may not be positioned on
the side of a tool or garden shed standing as an island within
the lawn to be mowed.
It is recommended that you mow your lawn once with a con-
ventional lawnmower before installing and before the first
mowing of the new season and whenever the grass clippings
would be longer than 5 mm.
The mower's cutting system is designed to cut small lengths
of grass (30–50mm). The clippings can remain as mulch to
fertilize the lawn. The height of cut for mower can be adjus-
ted to 30, 40 and 50mm.
It is recommended to start with a higher setting and then
gradually decrease the height of cut as the wire disappears
under the grass. This prevents your Indego from cutting the
wire.
Additional perimeter wire can be added using a wire con-
nector (see figures D–E).
The perimeter wire can be extended up to a maximum length
of 350m.
The perimeter wire can be buried up to 5 cm under the
ground (or under non-metallic slabs).
To avoid causing damage to the perimeter wire, do not verti-
cut or rake the area where it is positioned.
When laying out the wire avoid angles of less than 45°. This
can affect the performance.
F 016 L94 038 | (04.11.2020) Bosch Power Tools

Bosch Indego S+ 500 Specifications

General

Power source	Battery
Battery voltage	18 V
Type	Robotic lawn mower
Cutting width	190 mm
Grass catcher	-
Product color	Black, Green
Cutting system	Rotary blades
Maximum lawn area	500 m²
Maximum cutting height	50 mm
Minimum cutting height	30 mm
Suitable for slope up to	27 %
Number of height positions	3
Cutting clearance adjustment	Yes

Weight and Dimensions

Depth	445 mm
Width	364 mm
Height	202 mm
Weight	7700 g