en
9
Switching the
appliance on
Fig. 2
1. Switch on the appliance with the On/
Off button 1.
A warning signal sounds, the
temperature display 4 flashes and the
alarm button 5 is lit.
2. The warning signal is switched off by
pressing the alarm button 5.
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended the
following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: –18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting the
temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +3 °C
to +8 °C.
Keep pressing temperature setting
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 8.
Holiday mode
If leaving the appliance for a long period
of time, you can switch the appliance
over to the energy-saving holiday mode.
The temperature of the refrigerator
compartment is automatically switched
to +14 °C.
Do not store any food in the refrigerator
compartment during this time.
Switching on and off
Fig. 2
Press the holiday button 6.
If vacation mode is switched on, the
button is lit and the refrigerator
compartment temperature 8, no longer
indicates a temperature.
To Next Page
Loading...
Need help?
General
