en Automatic switch-off
10
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. A signal sounds and flashes on the
display for 10seconds.
Changing or cancelling the cooking time
1.
Select the hotplate.
2.
Touch .
3.
Change the cooking time using or or set to .
Switching off the continuous signal
You can switch the signal off manually.
▶
Touch any symbol.
a The displays will go out and the audible signal will
stop.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→Page10
Tip:The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. →Page9
7.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
1.
Switch on the kitchen timer.
There are 2 different ways to switch the kitchen
timer on.
If a hotplate has been
selected.
Touch twice within
10seconds.
If a hotplate has not
been selected.
Touch .
a The indicator lights up.
2.
Use or to set the time.
a The time counts down.
a When the time has elapsed, a signal sounds.
lights up on the timer display. The display switches
off after 10seconds.
Displaying the time
▶
Select the kitchen timer with .
a The time is displayed for 10seconds.
Setting the correct time
1.
Select the kitchen timer with .
2.
Set the required time with or .
Switching off the timer signal
You can switch the signal off manually.
▶
Touch any touch field.
a The display goes out and the audible signal ceases.
8 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1to 10hours).
The heat to the hotplate is switched off. and the re-
sidual heat indicator / flash alternately on the hot-
plate display.
8.1 Continuing cooking after automatic
switch-off
1.
Touch any control.
a The display goes out.
2.
Reset.
9 Basic settings
You can configure the appliance to meet your needs.
9.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
play
Selection
Automatic childproof lock
– Switched off
1
– Switched on
– Manual and automatic childproof lock are
switched off.
1
Factory setting
Dis-
play
Selection
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
1
1
Factory setting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
