CC408 | Operators Guide | 1. Introduction EN | 5
Bosch Security Systems | 5/04 | 920050O.OG.112
1. Introduction
Congratulations on selecting the Solution 880 Model
CC408 Control Panel to protect you and your
property. To obtain the most from your unit, take the
time to read through this manual and familiarise
yourself with the operating features of this system. In
all aspects of planning, engineering, styling,
operation, convenience, and adaptability, we have
sought to anticipate your every possible requirement.
Programming simplicity and speed were some of the
major considerations and we believe that our
objectives in this area were more than satisfied.
This guide explains all aspects of operating the
control panel. All system parameters and options are
detailed. Suitability is left up to the individual. Every
system can be tailored to meet all requirements
quickly and easily.
2. Specifications
Table 1: Specifications
Temperature Range
0
o
C to +45
o
C
(+32
o
F to +113
o
F)
Humidity
10% to 95%
Power Source
TF008 Plug Pack –
240 VAC/18 VAC @ 1.3 A
Stand-By Current
65 mA
Current Draw In
Alarm Condition
115 mA
Current Draw In
Alarm Condition
with Codepad
105 mA
Back-Up Battery
6 Ah/12 VDC Rechargeable
sealed lead acid battery
Dimensions (case,
packed in carton)
30.6 cm x 26.2 cm x 8.4 cm
(12.05 in. x 10.31 in. x 3.31 in.)
Weight
2.5 Kg (5.51 lb.)
Supplier Code
N771
New Zealand
Telepermit
PTC 211/98/083
Malaysia Approval
Number
Pending
The Austel permit issued for this product
is subject to the following conditions:
The Solution 880 Model CC408 Control
Panel can only be powered by a Bosch
Security Systems TF008 Plug Pack
(Approval Number Q92128).
Test the sirens, strobe, and zones at
weekly intervals. See Section 17 Testing
for further information.
3. Features
The Solution 880 Control Panel uses the latest in
microprocessor technology to provide you with more
useful features and superior reliability and
performance. The main features of the control panel
are listed below:
• Eight programmable User Codes
• STAY Mode and AWAY Mode operation
• Six programmable burglary zones
• Two programmable 24-hour zones
• Siren and/or dialler lockout per zone
• Delayed reporting
• Built-in telephone fail monitor
• Day alarm
• Remote arming
• Answering machine bypass
• Event memory recall
• Upload/download programmable
• Auxiliary output (Output 2)
• Relay output
• Eight radio remote user codes
• Entry and exit warning beeper
• EDMSAT – satellite siren compatible
• Separate fire alarm sound
• Dual reporting
• Sensor watch
• Dynamic battery testing
• Automatic arming/automatic disarming
• AC fail and system fault indicators
• Walk Test Mode
• Monitored siren output (Output 1)
• Strobe output
• Telco arm/disarm sequence (call forwarding)
To Next Page
Loading...
Need help?
General
