Bose Acoustic Wave music system II. User Manual

19
Connecting Other Equipment
English Français NederlandsDeutsch Italiano
5. Press and hold Volume or to adjust the volume level. VOLUME - 00 (silent) to 99
(loud) appears on the display to indicate the level. If the volume level of your Acoustic
Wave
®
music system II cannot be adjusted high enough, increase the volume level of the
connected device.
Figure 19
Connecting an MP3 player
to the AUX IN connectors
Stereo cable (not supplied)
AUX IN
connectors
MP3 player
Connecting your Acoustic Wave
®
music system II to a Lifestyle
®
system
Your Acoustic Wave
®
music system II can be used as an expansion speaker for a Bose
®
link-
enabled Lifestyle
®
system. Your music system is shipped from the factory ready to operate in
a Bose link network using room code B. If room code B is already assigned to another Bose
link product in your home, you will need to change the room code in your music system (see
“Personalizing Your Acoustic Wave
®
Music System II” on page 20). Make sure the room code
set in your Acoustic Wave
®
music system II matches the room code set in the Lifestyle
®
remote used in the room.
Refer to your Lifestyle
®
system owner’s guide for more information.
You can purchase the required remote and cables on the Internet (www.bose.com), or by
phone. See the inside back cover for contact information.

Bose Acoustic Wave music system II. Specifications

General

Brand	Bose
Model	Acoustic Wave music system II.
Category	Remote Control
Language	English