Bose Acoustimass 10 Series III User Manual

14
Using your system
Be sure to get the digital audio signal
To be sure that the digital audio signal from your DVD player reaches your surround receiver,
connect the digital audio output from your DVD player to the digital audio input on your
receiver (
Figure 7).
Before you play a DVD disc, be sure to select the digital ouput in the setup menu of your DVD
Player. For additional setup and operating information, please refer to the owner’s guide that
came with your surround receiver.
Figure 7
Digital signal connections
on a surround receiver
Setting your analog surround sound receiver
For analog surround sound (not digital) applications, we recommend that you set the sur-
round-sound center mode of your receiver to WIDE. Instructions for this process vary,
depending on the brand and model of your surround receiver. Follow your receiver owner’s
guide for testing and adjusting the balance of each speaker.
SURROUND SPEAKERS
R CENTER
FRONT SPEAKERS
R
L
LREAR
DIGITAL
IN
PLAY IN
(OPTICAL)
PLAY IN
(COAXIAL)
DIGITAL
IN
PLAY IN
(OPTICAL)
PLAY IN
(COAXIAL)
Note: Use the OPTICAL or COAXIAL
digital input connections, but not both
.
OR

Bose Acoustimass 10 Series III Specifications

General

Brand	Bose
Model	Acoustimass 10 Series III
Category	Home Cinema speakers
Language	English