Bose CineMate 120 User Manual

30 - English
Care and Maintenance
Factory reset the system
To troubleshoot problems, reset the System menu and ADAPTiQ
®
to the
factory settings.
1. Press
on the remote control.
2. Press
until 16 FACTORY RESET appears on the display.
3. Press 5.
The system resets.
4. Run the ADAPTiQ audio calibration
(see page 18).
Reset a source button on the remote control
If you are experiencing problems with a source button on the remote control, reset
the source button to the factory settings.
Note: After performing this procedure, your source button is in CEC mode.
1. On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
Only the appropriate source button glows.
2. On the number keypad, enter 0140.
Service connectors on the Acoustimass module
The Service and Data connectors are for service use only. Do not insert any cables
into these connectors.

Bose CineMate 120 Specifications

General

Disc types supported	No
Optical disc player type	Not included
Apple docking compatibility	Not supported
3D	-
Full HD	Yes
RMS rated power	- W
Audio output channels	1.1 channels
Subwoofer type	Active subwoofer
Product color	Black
Cables included	HDMI
HDMI in	4
SCART ports quantity	0
Number of HDMI outputs	1

Weight and Dimensions

Main unit weight	1490 g
Subwoofer weight	6300 g
Main unit dimensions (WxDxH)	313 x 208 x 64 mm
Subwoofer dimensions (WxDxH)	197 x 286 x 375 mm