Bose ControlSpace ESP-88 User Manual

95
Once the test is complete, open the ControlSpace
TM
software and set the ESP-88 chassis so
that there is no connection, as shown in the examples below. This must be done so that the
chassis will not be configured for pass-through when it gets back to the customer.
Setting of outside of ESP No connection
Write no connection by “connecting”. And disconnect.
Push ok button on ATS Basic Macro dialog.
Then return to first dialog, choose finish or continue.
TEST PROCEDURES

Bose ControlSpace ESP-88 Specifications

General

Brand	Bose
Model	ControlSpace ESP-88
Category	Recording Equipment
Language	English