Bose FreeSpace 3 Installer's Guide

5
English
Installation
Refer to installation manual
PN254410 for proper installation
and operation instructions
FreeSpace 3
Acoustimass Module
®
Note: Jumpers required
for 70V/100V operation.
For transformer bypass,
remove jumpers from
transformer settings and
use 4-8Ω input.
SATELLITE
CONNECTIONS
4-8Ω
INPUT
STEREO
CH 2
STEREO
CH 1
SAT 1
SAT 2
MONO
USE JUMPERS
SAT 4
SAT 3
SAT 2
SAT 1
+
100W 50W 25W 12W NC
TRANSFORMER SETTINGS
+100V
+70V
COMM
MONO
70V/100V
INPUT___
Connection jumpers
as factory installed
2.2 Transformer tap setting or bypass
• Lower Wattage: The transformer tap is set at the factory for
100W use. To set it for lower wattage, remove the end of the
+ jumper wire that is connected to 100W and reattach it to the
appropriate tap (50W, 25W, or 12W).
• Mono Direct: To bypass the transformer and prepare the
loudspeaker for 4Ω use and mono sound input, remove only
the two transformer jumper wires. Leave the CH1 and CH2
input jumpers as they are.
• Stereo Direct: To bypass the transformer and prepare the
loudspeaker for 4Ω use and stereo sound input, remove all
jumper wires.
Refer to page 7 for wiring details.
Refer to installation manual
PN254410 for proper installation
and operation instructions
FreeSpace 3
Acoustimass Module
®
Note: Jumpers required
for 70V/100V operation.
For transformer bypass,
remove jumpers from
transformer settings and
use 4-8Ω input.
SATELLITE
CONNECTIONS
4-8Ω
INPUT
STEREO
CH 2
STEREO
CH 1
SAT 1
SAT 2
MONO
USE JUMPERS
SAT 4
SAT 3
SAT 2
SAT 1
+
100W 50W 25W 12W NC
TRANSFORMER SETTINGS
+100V
+70V
COMM
MONO
70V/100V
INPUT___
2.3 Direct (transformer bypass) use
• Connecting a mono source with the transformer bypassed

Bose FreeSpace 3 Specifications

General

Certification	CE
Product color	White
Housing material	Polystyrene (PS)
Recommended usage	-
Suitable for outdoor use	No
Driver diameter	64 mm
Number of drivers	1
Speaker placement	Tabletop/bookshelf, Wall-mountable
Audio output channels	2.0 channels
Impedance	5 Ω
Sensitivity	82 dB
Frequency range	50 - 16000 Hz
RMS rated power	- W
Package weight	1800 g
Transformer taps	25, 50, 100, 200 W
Harmonized System (HS) code	85182200

Weight and Dimensions

Depth	102 mm
Width	77 mm
Weight	800 g
Depth (with stand)	149 mm