18
2.3 Electrical connections
2.3.1 Wire protection
Note: If local code requires flexible metallic tubing or flexible metallic conduit, be sure it is well supported. Too much
unsupported flexible metallic tubing or flexible metallic conduit can weigh the loudspeaker down, pushing it away
from the ceiling surface.
2.3.2 Wire preparation
Strip the wires to
5
/
16
inch (8 mm).
Note: Stranded wire is recommended. DO NOT solder (tin) the wires.
2.3.3 Wire connections
Note: Keep the following rule in mind when making the wire connections.
Red on the loudspeaker is connected to the + on the amplifier.
Black on the loudspeaker is connected to the - on the amplifier.
2
1
2.0 Installation
English
AM180090_02_V.pdf • May 7, 2002
To Next Page
Loading...
Need help?
General
