33
Electrical specifications
System electronics
• Input sensitivity: 200mV (music input), 200µV (page input)
• Power output: 16W into 2Ω load
• Power requirements: 120V or 220-240V ~ 50/60Hz
• Maximum power consumption: 140W
• Remote volume control value: 10kΩ, Audio taper
• Music input impedance, channel A: Balanced: 32kΩ, Unbalanced: 11kΩ
• Music input impedance, channel B: Unbalanced: 10kΩ
• Page input impedance: Balanced: 9kΩ, Unbalanced: 1kΩ
• Page and line output impedance: 400Ω
• Page gain: 0dB to 80dB adjustable
• Frequency range: 80Hz – 16kHz
• Noise (line in to loudspeaker outputs): 20Hz – 20kHz bandwidth; -50dBV at 20dB gain into a 2Ω load
• Noise (line in to line outputs): 20Hz – 20kHz bandwidth; -65dBV at 20dB gain into a 10kΩ load
• Frequency response: 20Hz – 20kHz, ±1dB, referenced to 1kHz at line outputs
• Opti-voice
®
paging circuitry: voice band equalization for maximum speech intelligibility, AGC circuit for automatic
compensation of varying input levels, gradual return of music to original level after page
Mechanical specifications
System electronics
• Dimensions: 4 inch (H) x 7.5 inch (W) x 15 inch (D)
(10.16 cm x 19.05 cm x 38.10 cm)
• Weight: 11.3 lb (5.14 kg)
Flush-mount loudspeakers
• Dimensions: 10.42 inch (H) x 10.87 inch (W) x 6.5 inch (D)
(26.47 cm x 27.61 cm x 16.51 cm)
• Weight: 4.2 lb (1.9 kg) installed with mounting hardware
• Finish: Front baffle – Arctic white polymer
Rear enclosure – aluminum
Grille – vandal resistant, expandable metal mesh
Surface-mount loudspeakers
• Dimensions: 3.3 inch (H) x 7.6 inch (W) x 6.4 inch (D)
(8.38 cm x 19.30 cm x 16.33 cm)
• Weight: 2.5 lb (1.2 kg) installed with mounting hardware
• Finish: Front baffle – Arctic white or Pro grey polymer
Rear enclosure – Arctic white or Pro grey polymer
Grille – vandal resistant, expandable metal mesh
Specifications
English
AM180090_02_V.pdf • May 7, 2002
To Next Page
Loading...
Need help?
General
