Bose FreeSpace DS 40SE User Manual

Bose
®
DS Trim Plate (accessory)
21
Mounting the Bracket
With standard steel 4" x 4"
junction box
The FreeSpace
®
DS 40SE loudspeaker can be mounted directly on
standard U.S. steel 4" x 4" junction boxes. There may be several
junction boxes available that are compatible with the FreeSpace DS
40SE wall mount bracket, but Bose Corporation only recommends
the junction boxes it has validated.
U.S. 4" x 4" Standard Steel Junction Boxes
Approved by Bose
Manufacturer:
Steel City
Manufacturer:
Raco
Installation Type: Wooden Stud
Catalog Number
52151-V-1/2 & 3/4
235
8235
Installation Type: Metal Stud
Catalog Number
52151-CV-1/2 & 3/4 237
Please check pro.Bose.com for an up-to-date list of
Bose validated junction boxes.
• It is the responsibility of the installer
to properly install junction
boxes to ensure the safety of the loudspeaker installation. Consult
a building professional for the proper junction box installation
methods before installing the loudspeaker.
• The junction box should be installed in such a way that it is
str
ucturally capable of supporting the weight of the loudspeaker.
A 10:1 safety weight ratio is recommended.
• Failure to properly install a junction bo
x or loudspeaker could
result in damage, injury, or death.
•Use #8-32 x 2" truss head screws (4) included
with the accessory
Bose DS Trim Plate.
U.S. ONLY • KUN USA • NUR USA • SÓLO EE UU • ÉTATS-UNIS UNIQUEMENT • SOLO USA • ALLEEN VS • ENDAST USA
DS40SE.book Page 21 Friday, March 26, 2010 2:53 PM

Bose FreeSpace DS 40SE Specifications

General

Brand	Bose
Model	FreeSpace DS 40SE
Category	Speakers
Language	English