EXPANDING YOUR AUDIO LINK
Figure 1
Connection to
a
LIFESTYLE®
SA-3, amplifier,
as an example
Bose link A cable
3. Insert the small plug on the power pack cable into the
AC
Power jack
on
the receiver and plug the pack into a wall
outlet.
The Status LED lights to verify this power connection.
I
Note:
For information on the meaning
of
the different Status
LEO
lights, refer to the owner's guide that came with your Bose link
AL8
Homewide Wireless Audio Link.
Instructions
for
non-Bose
or
older
Bose products
The
AR1
receiver can connect to some products that are not
Bose link compatible, including:
• Non-Bose products like a tuner/receiver or powered speaker
system
• Bose powered speakers, a radio, or system with
its
own
volume and on/off controls and line-level female RCA input
jacks connected to the receiver
Any of the above products require the use of an RCA to DIN
adapter cable for connecting to the receiver.
An
adapter kit,
which contains two of these cables,
is
available from Bose.
I
Note:
To
order the adapter
kit,
contact Bose
and
request Part
Number
285320-207. For Bose contact information, refer to the
address sheet included
in
the carton.
6
To Next Page
Need help?
General
