REFERENCE
Troubleshooting Customer service
Problem What to do
System not
responding
to
controls
A device is not
responding to
remote control
commands
Intermittent
operation using
the RC-35S2
remote
System turns on
oroff,orchanges
sources
unexpectedly
when no buttons
on
the RC-35S2
remote have been
pressed
12
• Make sure the RC-35S2 remote and the
main room system have the same house
code. See "Getting the remote ready" on
page
3.
• Make sure the RC-35S2 remote and the
expansion system have the same room
code. See "Getting the remote ready"
on
page
3.
• Make sure the device is on.
• Install
an
IR
blaster
in
the main room.
• Check the batteries to see if they need
changing.
• Move the remote to a different location to
see if the problem
is
simply caused by
"dead spots"
in
the building.
• Check to see if someone
in
the main room
is
using the primary remote control
in
that
way.
•
You
may be
experiencin~
a control conflict
with another
LI
FESTYLE system near
your home. Change the house code. See
"Changing the house code" on page
9.
For questions about the RC-35S2 remote or
L1FESTYLE®
system expansion, contact your local
Bose dealer.
To
contact Bose directly, see the address list
included with your
L1FESTYLE®
system
or
visit
http://owners.Bose.com.
Technical information
Remote control range: 65 ft
(20
m)
Size: 1.0"H x 2.3"W x
7.T
'
L
(2.5 cm x 5.8 cm x 19.5 cm)
Weight: 6.9 oz (195
g)
Battery type: AAA or IEC-LR3 1.5V batteries
(4)
Frequency: U.S./Canada/other: 27.145 MHz
EUfother: 40.685 MHz
To Next Page
Loading...
Need help?
General
