10
Using Your Acoustic Wave
®
Multi-Disc Changer
Playing the multi-disc changer
Use buttons on the multi-disc changer remote or console, as shown below.
Function Remote control Changer console
To play the selected CD.............................
Results:
• If there is no CD in the slot, the word
“DISC” flashes on the multi-disc changer
display.
• If there is a disc, the display shows the
current track playing and elapsed play
time.
Press again to pause.
To pause the disc while it is playing.........
Press again to resume play.
To stop the CD............................................
Results: In the display window, the CD and
track number still appear, while the elapsed
time returns to zero.
To mute the CD........................................... Not available
To skip tracks on a CD...............................
Results: The display shows the new track
number and elapsed time.
To scan through a track.............................
Press and hold to scan backward or for-
ward . Continue holding to scan the next
or previous track(s).
(Press and Hold) (Press and Hold)
To move to the next disc...........................
Results: CD number on the display
changes; LED next to the slot of the newly
selected CD flashes green, then stays lit.
To select a specific CD by number.............
Results: The CD in that numbered slot
begins to play.
Not available
Play/Pause Stop Next Disc CD Mode
AUX 1 AUX 2
ON/OFF
Changer
Pla
To Next Page
Loading...
Need help?
General
