8
Using Your Acoustic Wave
®
Multi-Disc Changer
Turning your complete system on and off
To turn on both the changer
and the Acoustic Wave
®
music system
, press the Play/Pause
button (Figure 6) on the changer console.
Figure 6
Play/Pause button on the
Acoustic Wave
®
multi-disc
changer console that turns
on both the changer and
the Acoustic Wave
®
music
system
This turns on both units, so the multi-disc changer is ready to play.
•To turn on only the Acoustic Wave
®
music system to its last played sound source, press
the On/Off key on the new remote control or on the console of the Acoustic Wave
®
music
system.
To turn off both the Acoustic Wave
®
multi-disc changer and the Acoustic Wave
®
music
system
, press the On/Off key on the remote control.
•To turn off only the changer, press the On/Off key on the changer console.
Loading/unloading discs into the multi-disc changer
CAUTION:
Do not attempt to load more than one CD in any of the slots. Doing so can cause
the discs to jam and be damaged.
The Acoustic Wave
®
multi-disc changer holds up to five CDs. When it is on and a CD is
installed, the display indicates the number of the CD selected, the track it is playing, and the
elapsed time.
1.
To insert a CD into the changer,
slip one edge of the disc into an empty slot and press
on the opposite edge until the disc is all the way in (Figure 7 on page 9).
The LEDs on the front of the unit turn color as follows:
•
No light
indicates that the slot is empty.
•
Orange light
indicates that the slot is loaded with a CD.
This light flashes during ejection of the disc.
•
Green light
indicates that the CD in that slot is playing.
This light flashes while the changer is switching to that disc.
Play/Pause Stop Next Disc Random
AUX 1 AUX 2
ON/OFF
Play/Pause
AWMDC_OG.book Page 8 Monday, May 5, 2003 11:03 AM
To Next Page
Loading...
Need help?
General
