12
TIME
ALARM
SLEEP
TUNING
STA.
VOLUME
MUTE
AUX
AM
FM
ON/OFF
WAVE RADIO REMOTE CONTROL
1
23
4
5
6
PRESET STATIONS
Operating Your Wave
®
Radio
Operating the remote control
Aim the remote control at the display of your Wave radio. Use the remote buttons in the same
way you use the radio control panel. The remote normally works up to 20 feet in front of the
radio, and 6 feet to either side. Replace the remote control battery when it stops operating,
or its range seems reduced (normally every year or two). Keep in mind that lighting and other
room conditions, in addition to battery age, can affect the operating range of an infrared
remote control.
Operating the radio control panel
Most of the functions of the clock and the radio are operated by similar buttons on the
control panel or the remote control (Figure 7). You can access additional functions by press-
ing two control panel buttons simultaneously (such as both TUNING buttons to display the
station), which requires a separate button on the remote (STA).
The control panel ON/OFF and VOLUME buttons have raised ridges to help you locate these
frequently used buttons.
Figure 7
The Wave radio remote and
control panel buttons
WAVE RADIO
ALARM MODE
ALARM
SET
CLOCK
SET
VOLUME
PRESET STATIONS
123
456
TUNING
SLEEP/SNOOZE
AUX AM/FM
ON/OFF
Sets timed shutoff
Hold (and press TUNING up or down)
to set the time
Turns the radio on/off
Raises or lowers volume
Set or check the wakeup time
Set or check the
wakeup time
Sets timed shutoff
Displays current station
Turns the radio on and
selects AM or FM
Turns the radio on and
selects AUX
Stores/selects a
preset station
Tunes up or down
the AM or FM band
Press together to
display current station
Selects radio, tone, both, or no alarm
Mutes/unmutes the radio