7
Note: With a preferred age range, an alternate age range can be selected during each use, by pressing
the Age Precision button when the age range icon appears, after the thermometer is turned ON.
F. To remove the preferred age range, open the battery door, remove the batteries, wait 30 seconds and
re-insert the batteries.
IMPORTANT: To ensure accurate readings, you must always take a temperature reading in the age range
that corresponds to the individual’s age.
4
Position
Position thermometer on or up to 1” (2.5 cm) away from the
center of the forehead, just between the eyebrows.
When the thermometer is ready and on or 1” away from
the forehead. A horizontal line of dashes (“---”) will appear
on the screen.
For No touch readings, the yellow guidance light will show
you where you are aiming.
If the eyebrow area is covered with hair, sweat or dirt,
please clean the area beforehand to improve the reading
accuracy. It is important to hold the thermometer and
the forehead steady during measurement. Movement will
impact the temperature reading.
5
Take temperature
Three dashed lines mean the thermometer is ready to
take temperature. Press the temperature button. The
display will show a dashed line animation while it takes
a reading. Once the reading is complete a conrmation
beep will be heard and the appropriate fever light color
will be displayed on screen.
If the device is positioned too far away from the forehead, it will prompt you to
move closer by displaying the letters “FWD.” Slowly move the device toward the
forehead until the dashed line animation starts and a reading is displayed.
0 - 1” Away
Yellow light
will show
you where
you are
aiming.
English
To Next Page
Loading...
Need help?
General
Weight and Dimensions
