8
Note: At a very low charge level, the lights
might not fl ash immediately; it can take up
to 30 minutes.
• If the battery is running low, a red light is
fl ashing on the charge level display and
the motor is reducing its speed. Once the
battery is empty, the motor will stop; it will
need at least a 30-minute charge for one
usage.
• You can always store the handle on the
plugged-in charging unit to maintain it at
full power; a battery overcharge is pre-
vented by device.
Note: Store handle at room temperature
for optimal battery maintenance.
Caution: Do not expose handle to
temperatures higher than 50 °C.
Using your toothbrush
Brushing technique
Wet brush head and apply any kind of
toothpaste. To avoid splashing, guide the
brush head to your teeth before switching
on the handle (picture
2
). Guide the brush
head slowly from tooth to tooth, spending
a few seconds on each tooth surface. Start
brushing the outsides, then the insides and
fi nally the chewing surfaces. Brush all four
quadrants of your mouth equally (picture
3
).
You may also consult your dentist or dental
hygienist about the right technique for you.
In the fi rst days of using any electric tooth-
brush, your gums may bleed slightly. In
general, bleeding should stop after a few
days. Should it persist after 2 weeks, please
consult your dentist or dental hygienist.
If you have sensitive teeth and/or gums,
Oral-B recommends using the «Sensitive»
mode (optional in combination with an
Oral-B «Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart
Ring (2) that has various functionalities indi-
cated via diff erent colors of light:
White (default)= Operating and visual timer
light (choose individual color via Oral-B
TM
app settings)
Red = Pressure sensor light
Blue = Bluetooth
®
pairing indicator
Timer
You can choose between «Professional» or
«2-Minute» timer.
The «2-Minute» timer signals with a long
stuttering sound and a fl ashing light of the
Smart Ring (2) that the professionally
recommended 2-minute brushing time has
been reached.
The «Professional» timer signals with a short
stuttering sound and a fl ashing light of the
Smart Ring at 30-seconds intervals to move
to the next quadrant of your mouth (picture
3
). A long stuttering sound and a fl ashing
light indicate the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brush-
ing time, even when the handle is briefl y
switched off during brushing. The timer
resets if pausing longer than 30 seconds,
briefl y pressing the mode button (4) dur-
ing pause or placing the handle on the
plugged-in charger.
Note: During the use of special Oral-B
TM
app
features, the visual timer light may be deac-
tivated.
Timer setup:
Your toothbrush comes with the «Profes-
sional» timer activated. To change this, press
and hold the mode button (4) for
2 seconds. Toggle between timer selection
by pressing the on/off button (3). Confi rm
selection by pressing the mode button.
• 2 LED’s illuminated indicate «2-Minute»
timer
• 4 LED’s illuminated indicate «Professional»
timer
Note: You can also set/advance the timer
functionality via Oral-B
TM
App.
Pressure sensor
If too much pressure is applied, the Smart
Ring (2) will light up in red, reminding you to
reduce pressure. In addition the pulsation of
the brush head will stop and the oscillation
91864651_D701_D700_KR_ASEAN_V3_S6-28.indd 891864651_D701_D700_KR_ASEAN_V3_S6-28.indd 8 22.05.18 10:0322.05.18 10:03
Business Use - P&G AUTHORIZED POA-00048699 Rev 001 Effective Date 2018-06-05 Printed 2018-07-27 Page 8 of 28
To Next Page
Loading...
Need help?
General
