10
We do not recommend using the Oral-B
«FlossAction» or Oral-B «3D White» brush
head with braces. You may use the Oral-B
«Ortho» brush head, specifi cally designed to
clean around braces and wires.
Connecting your
toothbrush to your
Smartphone
The Oral-B
TM
App is available for mobile
devices running iOS or Android operating
systems. It can be downloaded for free from
App Store
(SM)
or Google Play™.
The Oral-B™ App gives you the opportunity
to chart your brushing progress and cus-
tomize your toothbrush settings (for many
more benefi ts see the Oral-B™ App instruc-
tions).
• Start the Oral-B™ App. It will guide you
through the entire Bluetooth pairing pro-
cedure.
Note: Oral-B™ App functionality is limited
if Bluetooth wireless technology is deacti-
vated on your smartphone (for directions
please refer to your smartphone’s user
manual).
• Any app instructions will be displayed on
your smartphone.
• If Bluetooth wireless technology is
activated on your handle, the Bluetooth
symbol on the radio transmission display
(7) illuminates. Once the handle is paired,
the Smart Ring (2) fl ashes briefl y.
• Keep your smartphone in close proximity
(within 5m distance) when using it with
the handle. Make sure the smartphone is
safely positioned in a dry place.
Note: Your smartphone must support
Bluetooth 4.0 (or higher)/Bluetooth Smart
in order to pair your handle.
Compatible smartphones are listed in App
Store
(SM)
or Google Play™.
Caution: Follow your smartphone’s user
manual to ensure your phone/charger is
designed for use in a bathroom environ-
ment.
Cleaning recommen-
dations
After brushing, rinse your brush head under
running water with the handle switched on.
Switch off and remove the brush head.
Clean handle and brush head separately;
wipe them dry before reassembling. Unplug
the charging unit before cleaning. Brush
head holder (10a), compartment and pro-
tective cover (10b), as well as smartphone
holder stand (16) are dishwasher-safe.
Basic charger should be cleaned with a
damp cloth only (picture
5
).
Accessories
(depending on model)
Smartphone Holder
• Before each use, make sure mirror, suc-
tion cup surface (11d) and holding brack-
ets (11a) are always clean and dry (picture
B1). Use a fuzz-free cloth for cleaning
suction cup surface and mirror. In par-
ticular make sure suction cup surface and
mirror are free from any contamination
(e.g. hair, dust, oil, fuzz, dirt etc.).
• Press your smartphone holder (11) just with
enough pressure, centered at nose level
on a sturdy mirror. Then mount the holder
by pressing the lever arm (11b) towards the
mirror until it snaps in (picture B2).
Note: Only affi x on mirror to ensure safe
and correct conditions. For use in bath-
room only. Do not use in automobiles.
• Always make sure the smartphone
holder is securely mounted on the mirror
before inserting your smartphone. Place
your smartphone (portrait) sideways in
between the holding brackets (11a) by
pressing against one bracket with your
phone and sliding the other bracket to the
side (picture B2). Follow the same proce-
dure to remove your phone again.
• Adjust the overall position for the required
angle by moving the ball joint of the holder
(picture B3).
• Once done, remove your phone from the
holder. Take off the smartphone holder
91864651_D701_D700_KR_ASEAN_V3_S6-28.indd 1091864651_D701_D700_KR_ASEAN_V3_S6-28.indd 10 22.05.18 10:0322.05.18 10:03
Business Use - P&G AUTHORIZED POA-00048699 Rev 001 Effective Date 2018-06-05 Printed 2018-07-27 Page 10 of 28
To Next Page
Loading...
Need help?
General
