Filter Replacement Schedule
Filter Type Replacement Schedule Function
Sediment 6 months or 950 gallons
Performs a coarse filtration of original
water. Removes mud, sand, iron, rust,
suspensions and impurities.
Carbon Block 6 months or 950 gallons
Reduces chlorine taste and odor, lead,
and cysts.
Reverse Osmosis
(RO)
6 months or 1,900 gallons
Removes up to 99% of contaminants
including arsenic, lead, fluoride, heavy
metals, and more.
Post Carbon 6 months or 950 gallons Taste and impurity removal.
Replace the Filters
IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will
damage the machine and void any warranty.
When the RO (2) and PCB (3) filter element indicator lights flash, the life of the filter element has expired. To replace, do
the following:
1. Shut o the water supply.
2. To flush your new filters, follow the instructions in Step 4 - Flush the Filters, page 8.
3. filters are installed as follows, from left to right: sediment filter, carbon block filter, RO filter, and post carbon filter.
4. After replacing the filter element, press the UP arrow (1) for 3 seconds to reset indicators.
Filter Specifications
Sediment Filter Carbon Block Filter
(Sediment, Dirt, and Rust Removal) (Chlorine Taste and Odor Reduction)
Filter Capacity
950 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Flow Rate
0.8 GPM
Suggested PSI
14.5-58 psi
Suggested PSI
14.5-58 psi
Temperature
33-100 °F
Temperature
33-100 °F
RO Filter Post Carbon Filter
(Reduce Impurities to 0.0001 Microns) (Taste and Impurity Removal)
Filter Capacity
1,900 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.035 GPM
Flow Rate
0.8 GPM
Suggested PSI
58-116 psi
Suggested PSI
14.5-58 psi
Temperature
33-100 °F
Temperature
33-100 °F
To Next Page
Loading...
Need help?
General
