39
2
——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Selecting a stitch
Using the stitch selection keys, select the desired
stitch.
When the sewing machine is turned on, the straight
stitch ( left needle position) is selected.
a
Turn on the sewing machine.
b
Confirm that the utility stitch indicator is lit. If
it is not lit, press the utility stitch key to turn
on the utility stitch indicator.
a Utility stitch key
b Utility stitch indicator
c
Confirm that the desired stitch type number is
displayed on the LCD. If it is not, press the
utility stitch key once or more until the
desired stitch type number is displayed on the
LCD.
a Utility stitch key
b Stitch type number
d
Press (stitch selection keys). The
number of the selected stitch is displayed.
Press the “+” or “–” side of to increase or
reduce the number by one. Pressing on the
right changes the digit on the right and pressing
on the left changes the digit on the left.
X The stitch is selected.
Memo
● The pattern numbers of the stitches are
displayed on the machine.
e
Attach the presser foot indicated in the LCD.
a Presser foot type
• For details, refer to
“Replacing the presser
foot” (page 36)
.
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
beside the stitch number.
f
If necessary, adjust the stitch length and
width.
• For details on sewing with each of the stitches,
refer to the following example.
Stitch type
number
Stitch type
1 Utility stitches
2 Satin stitches
3 Mirror image stitches
a
b
a
To Next Page
Loading...
Need help?
General
