Cover E
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Operation panel
The operation panel, located on the front of the sewing machine, consists of various buttons and sliders for
specifying how the stitch will be sewn.
1 Stitches
There are 50 stitches. Select stitch 00-49.
A letter (A, G, J, N or R) indicating the presser foot that should be used appears below the stitch number.
2 Stitch indicator / 3 Stitch selection key
Press the stitch selection key, and then select the number for the stitch that you wish to use. 50 stitches are available. For
details, refer to “Selecting stitching” (page 58).
4 Stitch length adjutment indicator/ 5Stitch length adjustment button / 6Stitch length adjustment slider
These are used to adjust the length of the stitch. After pressing the stitch length adjustment button so that the indicator
lights up, slide the stitch length adjustment slider to adjust the stitch length.
7 Stitch width adjustment indicator / 8Stitch width adjustment button / 9Stitch width adjustment slider
These are used to adjust the width of the stitch or the needle position. After pressing the stitch width adjustment button so
that the indicator lights up, slide the stitch width adjustment slider to adjust the stitch width.
3
8
7
9
1
2
5
46
S2_brotherE.book Page E Wednesday, May 14, 2003 8:05 PM
To Next Page
Loading...
Need help?
General
