APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 16
4. USE CARD COMMANDS FROM PCL
4.1 Execute Macros
Command
ESC & l 2 X Execute Macro
ESC & l 3 X Call Macro
ESC & l 4 X Macro Overlay
Available Devices
F, A, H, I
Description
The macros saved in the device can be executed from the PCL command language as well as saving macros in
the printer memory.
The priority for searching is as follows;
1. Macro in printer memory
2. Macro in Card 1
3. Macro in Card 2
4. Macro in Internal HDD
The above priority is never affected by the select storage device command (ESC CR ! 12358F).
For HL-6050/6050D/6050DN printers, the priority for searching is as follows;
1. Macro in printer memory
2. Macro in Card
3. Macro in Internal flash memory
For HL-8050N/2700CN printers, the priority for searching is as follows;
1. Macro in printer memory
2. Macro in Card
Error
N/A
To Next Page
Loading...
Need help?
General
