Introduction
2
1
Hardware requirements 1
Supported operating systems 1
AirPrint is compatible with iPad (all models), iPhone (3GS or later) and iPod touch (3rd generation or later)
devices running the latest version of iOS. For more information, visit Apple’s website:
(http://support.apple.com/kb/HT4356).
Network settings 1
In order to use AirPrint, your mobile device must connect to the wireless network to which your Brother machine
is connected. AirPrint supports wireless connections that use Ad-Hoc mode, infrastructure mode, or Wi-Fi Direct
®
.
To configure your mobile device for a wireless network, refer to your mobile device’s user’s guide. A link to
your mobile device’s user’s guide on Apple’s website can be found by tapping in Safari.
To configure your Brother machine for a wireless network, see your Brother machine’s Quick Setup Guide or
Online User’s Guide on your model's Manuals page on the Brother Solutions Center
(http://support.brother.com).
If your Brother machine supports Wi-Fi Direct
®
and you want to configure your Brother machine for a Wi-Fi
Direct
®
network, see your Brother machine's Online User’s Guide on your model's Manuals page on the
Brother Solutions Center (http://support.brother.com).
Ad-Hoc mode 1
Connect your mobile device to your Brother machine without a wireless access point/router.
1 Mobile device
2 Wireless network machine (your Brother machine)
If your mobile device is running iOS7, you must enable IPv6 for your Brother machine when using AirPrint
in Ad-Hoc mode.
2
1
To Next Page
Loading...
Need help?
General
