Scan (Windows
®
)
40
X-Offset / Y-Offset / Width / Length / Center
When you select Fixed Area (Deskew OFF) from the Cropping drop-down list, you can adjust the scan area
manually using the following values:
X-Offset
Adjust the distance from the left edge of the scanner to the left edge of the area in the document that you
want to scan.
Y-Offset
Adjust the distance from the top edge of the document to the top edge of the area in the document that
you want to scan.
Width
Adjust the width of the area in the document that you want to scan.
Length
Adjust the length of the area in the document that you want to scan.
Center
Allow the software to automatically center the scanned image based on the selected paper size.
OverScan / Adjustment
OverScan (Adjustment) allows you to add a specific margin at top and bottom of the edge of the image.
This is used to reduce possible corner clipping on skewed images and is often applied to a batch of skewed
documents.
Select a value between 0 and 4.5 mm.
Background Setting
Select White Background or Black Background from the drop-down list to set the background color for your
scanned images.
This option is available only when you select Automatic (Deskew ON) in the Cropping drop-down list.
Unit
Select Millimeters, Inch, or Pixel from the drop-down list. The default setting is based on your OS language.
Reload Timeout
Set the amount of time the scanner will wait before auto-scanning the next document after a scan job is
completed. Use this feature if you load many separate documents in the ADF that must be scanned using
the same scan settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
