Brother PQ-1500 User Manual

CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and
Needle Chart
Changing
Presser Feet
Basic
Sewing
Caring for
Your
Machine
Trouble
Shooting
7
Threading (1)
Note
Do not move bobbin stop while machine is running.
Bobbin Winding
1
2
3
1 Put spool of thread on spool pin.
✽ Use spool cushion when using cross
wound thread.
✽ Use spool cap when using parallel-
wound thread.
2 Lift thread guide bar all the way up,
and run thread through triangular
thread guide as shown in drawing.
3Run thread through bobbin winding
thread guide as shown in drawing.
4 Run thread through top thread notch
1, and align bottom thread notch 2
with guide pin on bobbin winder
shaft.
5 Press bobbin stop up against empty
bobbin. If the bobbin stop does not
slide easily between the top and bot-
tom of the bobbin, check that the bob-
bin is seated properly with the guide
pin (4) inserted into the lower notch.
Spool Cushion
1
2
Bobbin
Bobbin Winder
Shaft
Guide Pin
Thread Notch 1
Thread Notch 2
Bobbin Stop
Spool Cap
Spool of Thread
4 - 9: See following illustrations.

Brother PQ-1500 Specifications

General

Brand	Brother
Model	PQ-1500
Category	Sewing Machine
Language	English