50
PRODUCT INFORMATION
SPECIFICATIONS
200, 225, 250 (3.3 Liter) Models
Displacement 200.1 cu. in. (3279 cc)
Engine Type 90° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating Range 200 HP – 4500 to 5800 RPM
225 HP – 4500 to 5800 RPM
250 HP – 4500 to 5800 RPM
Power
(1)
200 HP – 200 HP (147 kw) @ 5150 RPM
225 HP – 225 HP (166 kw) @ 5150 RPM
250 HP – 250 HP (184 kw) @ 5150 RPM
Idle RPM in Neutral
(2)
500 ± 50
Ignition Timing
(2)
Controlled by the outboard’s EMM
Emission Control System:
per SAE J1930
(2)
ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON) – Refer to FUEL REQUIREMENTS on page 17
Oil – Lubricant Evinrude/Johnson XD100 oil or TC-W3 NMMA-certified oil
– Refer to OIL REQUIREMENTS on page 16
Warning Signals Controlled by the outboard’s EMM
Battery, Minimum
(3)(4)
675 CCA (845 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 0°C (32°F)
Spark Plug
(2)
Refer to ECI Label
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 1000 MCA (800 CCA) battery when operating in temperatures below 0°C (32°F).
(4) Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery (generally
available in group 29 size).
To Next Page
Loading...
Need help?
General
