Lerchenfeldstr. 9
87600 Kaufbeuren
Tel.: 049 (0)8341 9764-0 Fax: 049 (0)8341 67806
Please read general safety information carefully!
Attention!
The following important safety instructions must be observed when using
electric devices, as protection against electric shock, injury and fire hazard.
Please read and follow these instructions before using the device.
Setting up
Please ensure that the device is placed securely and cannot fall down or tip
over. Always position cables so that nobody can trip over them. Do not expose
electric devices to rain. Do not operate electric devices in a damp or humid
environment. Do not operate electric devices in the vicinity of flammable
liquids or gases. Place electric devices so that children do not have access to
them.
Protection against electric shock
Only operate devices whose housing and cables are undamaged. Ensure safe
cable positioning. Do not pull cables.
Attention!
Safeguard the electric connection of the devices with a 30 mA-rated leakage
current circuit breaker, and only operate it with this protection. Observe the
power supply companies regulations.
Use
Do not use electric devices other than for the purpose specified by the
manufacturer.
Accessories
Only use accessories and supplementary devices supplied or recommended by
the manufacturer. Using other accessories is hazardous.
Purpose
The Modular-Electric-System Module B can not be operated as an individual
unit but only together with the Modular-Electric-System Module A. The
Module B works as an extension of the MES Module A, except for the charging
12 volts lead batteries, consisting of 6 seperate cells (e.g. car battery) with a
capacity of 55 – 160 Ah in conjunction with MES 250-(1-4) / Module A and a
capacity of 90 – 270 Ah in conjunction with MES 400-(1-4) / Module A. It is
universally usable and equipped for permanent operation and buffer operation.
The preferred application of the Module B are batteries with gel or a liquid
To Next Page
Loading...
Need help?
General
