11 - FA01818M4A - 01/2023 - © CAME S.p.A. -
ENGLISH
Translation of the original instructions.
General precautions for installers
Read the instructions carefully before beginning the installation and carry out the
procedures as specifi ed by the manufacturer. • Installation, programming, commissioning
and maintenance must only be carried out by qualifi ed, expert technicians and in full
compliance with the applicable law. • Before carrying out any cleaning or maintenance,
or replacing any parts, disconnect the device from the power supply. • Only use this
product for its intended purpose. Any other use is hazardous. • The manufacturer cannot
be held liable for any damage caused by improper, unreasonable or erroneous use. • The
product, in its original packaging supplied by the manufacturer, must only be transported
in a closed environment (railway carriage, containers, closed vehicles). • If the product
malfunctions, stop using it and contact customer services at https://www.came.com/
global/en/contact-us or via the telephone number on the website.
The manufacture date is provided in the production batch printed on the
product label. If necessary, contact us at https://www.came.com/global/en/
contact-us.
The general conditions of sale are given in the o cial CAME price lists.
Legislative references
The manufacturer CAME S.p.A. declares that the product described in this manual
complies with Directive 2014/53/EU.
The full EU declaration of conformity is available at the following address: www.came.
com.
Dismantling and disposal
Dispose of the packaging and the device responsibly at the end of its life cycle, in
compliance with the laws in force in the country where the product is used. The recyclable
components are marked with the material symbol and ID.
THE DATA AND INFORMATION IN THIS MANUAL MAY BE CHANGED AT ANY TIME AND
WITHOUT NOTICE.
MEASUREMENTS ARE IN MILLIMETRES, UNLESS STATED OTHERWISE.
To Next Page
Loading...
Need help?
General
