Page 3 - Manual FA01357-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
INSTALLING
Fitting
Place the casing where it is protected, and at least fi ve meters from any other receivers; and place the antenna
as high and as far as possible from any metal or reinforced concrete structures.
Use ø 6 cylinder head screws and suitable cable glands to ensure the IP is held fast.
Fit suitable cable glands, by drilling the marked inputs under the control panel.
Be careful not to damage the control board.
Technical data
Type RBE4024 RBE4230
Protection rating (IP) 54 54
Power supply (V) 24 AC/DC 120 - 230 AC
Frequency (Hz) / 50/60
Stand-by consumption (W) 0.43 0.67 - 0.8
Maximum power (W) 4.4 3 - 3.2
Relay contact rating - resistive load cosφ=1 (A/V) 5 / 230 5 / 230
Relay contact rating - (A/V) inductive load 1.5 / 230 1.5 / 230
Casing material ABS ABS
Operating temperature (°C) -20 ÷ +55 -20 ÷ +55
Apparatus class ||| II
Weight (Kg) 0.55 0.6
Fuses RBE4024 RBE4230
- Line (mA) 315 T 315 T
Page 3 - Manual FA01357-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions
To Next Page
Loading...
Need help?
General
