Canon Digital IXUS 60 User Manual

90
Viewing Images on a TV set
You can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied AV Cable.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 30). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
Use the toggle on the wrist strap
to open the terminal cover (p. 13)
and insert the AV cable all the
way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on
the TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
VIDEO
AUDIO
IN
Yellow
Black

Canon Digital IXUS 60 Specifications

General

Sensor Resolution	6.0 Megapixels
Optical Zoom	3x
Display Size	2.5 inches
Image Processor	DIGIC II
ISO Sensitivity	Auto, 80, 100, 200, 400, 800
Video Recording	640 x 480 at 30 fps
Battery Type	NB-4L Lithium-ion
Sensor Type	CCD
Sensor Size	1/2.5 inch
Digital Zoom	4x
Focal Length	5.8 - 17.4 mm (35mm equivalent: 35 - 105 mm)
Aperture Range	f/2.8-f/4.9
LCD Screen Resolution	173, 000 pixels
Shutter Speed	15 - 1/1500 sec
Storage Type	SD Card
Weight	140g (including battery)