109
You can set both the shutter speed and aperture manually as desired.
While referring to the exposure level indicator in the viewfinder, you can
set the exposure as desired. This method is called manual exposure.
* <a> stands for Manual.
1
Set the Mode Dial to <a>.
2
Set the ISO speed (p.88).
3
Set the shutter speed and aperture.
To set the shutter speed, turn the
<6> dial.
To set the aperture, hold down the
<
O
> button and turn the <
6
> dial.
4
Focus on the subject.
Press the shutter button halfway.
X The exposure setting will be
displayed in the viewfinder.
The exposure level mark <
h
> indicates
how far the current exposure level is
from the standard exposure level.
5 Set the exposure and take the picture.
Set the shutter speed and aperture as desired.
If the exposure level exceeds ±2 stops from the standard
exposure, the end of the exposure level indicator will display <
I>
or <
J> in the viewfinder. (On the LCD monitor, if the exposure
level is higher than ±3 stops, the <N> icon will blink at where <-3>
or <+3> is displayed.)
a: Manual Exposure
<O> + <6>
<6>
Exposure level mark
Standard exposure index
If [z2: Auto Lighting Optimizer] (p.119) is set to any setting other than
[Disable], the image may still look bright even if a darker exposure has
been set.
If ISO Auto is set, the ISO speed setting will change to suit the shutter
speed and aperture in order to obtain a standard exposure. Therefore,
you may not obtain the desired exposure effect.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
