Canon LV-5210 User Manual

35
Video Input
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.
1
2
Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SET button.
Move the red frame pointer to a level
and press the SET button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
User preset image in the Image Adjust Menu (p36, 37).
Custom
Image Select
Menu icon
Select an image level among Standard, Cinema, Custom by pressing
the IMAGE button on the remote control unit.
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
User preset image in the Image Adjust Menu (p36, 37).
Custom
Image Level Selection
Direct Operation
Menu Operation
IMAGE button
Standard
Cinema
Custom

Canon LV-5210 Specifications

General

Resolution	800 x 600 pixels
Dimensions (WxDxH)	300 x 238 x 94 mm
Horizontal resolution	500 lines
Contrast ratio (typical)	400:1
Projector native resolution	SVGA (800x600)
Dot clock scanning frequency	100 MHz
Digital zoom	1.6 x
Lamp type	UHP
Lamp power	200 W
Light source type	Lamp
Number of built-in speakers	1
Power consumption (typical)	260 W

Weight and Dimensions

Weight	2900 g