Canon MVX350i User Manual

128
Trimming Settings
Set the print style before you start with the trimming settings.
1. In the print setting menu, turn the SET dial to select
[TRIMMING] and press the SET dial.
The trimming frame appears.
2. Change the size of the trimming frame.
• Move the zoom lever toward T to shrink the frame, and
toward W to enlarge the frame.
• To cancel the trimming settings, move the zoom lever toward
W until the trimming frame disappears.
3. Move the trimming frame.
• Turn the SET dial to move the frame. Press the SET dial to
switch between the directions (up/down or right/left).
• Pressing the MENU button brings you back to the print
settings menu.
 About the color of the trimming frame (Canon CP-Printers only):
- White: No trimming settings.
- Green: Recommended trimming size. (The trimming frame may not appear in
green depending on the image size, paper size or borders settings.)
- Red: The image is magnified beyond recommended size. The image will be
printed coarsely.
 The trimming setting applies only to one image.
 The trimming setting is canceled with the following operations:
- When you turn off the camcorder.
- When you disconnect the interface cable.
- When you expand the trimming frame beyond its maximum size.

Canon MVX350i Specifications

General

Filter size	34 mm
Digital zoom	400 x
Optical zoom	20 x
Image stabilizer	Yes
Focal length range	45.4 - 908 mm
Sensor type	CCD
Total megapixels	1.33 MP
Optical sensor size	1/4.5 \
I/O ports	Headphone Microphone USB DV Direct Print Analogue-in AV
Camera shutter speed	1/2000 s
Display diagonal	2.5 \
Minimum illumination	0 lx

Weight and Dimensions

Depth	131 mm
Width	72 mm
Height	78 mm
Weight	500 g