Canon Pixma G3060 Series User Manual

What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. Use the software to specify the
output size, image corrections, and other settings.
ScanGear can be started from IJ Scan Utility or applications that are compatible with the standard TWAIN
interface. (ScanGear is a TWAIN-compatible driver.)
Features
Specify the document type, output size, and other settings when scanning documents and preview scan
results. Make various correction settings or finely adjust the brightness, contrast, and other parameters to
scan in a specific color tone.
Screens
There are two modes: Basic Mode and Advanced Mode.
Switch modes with the tabs on the upper right of the screen.
Note
• ScanGear starts in the last used mode.
• Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode tab to scan easily by following three simple on-screen steps (
, , and
).
291

Canon Pixma G3060 Series Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Connectivity	USB, Wi-Fi
Scanner Type	Flatbed
Scanner Resolution	600 x 1200 dpi
Copier Function	Yes
Functions	Print, Copy, Scan
Borderless Printing	Yes
Two Sided Printing	Manual
Multiple Copy	Up to 99 pages
Weight	6.4 kg
Ink Tank System	Yes
Dimensions (W x D x H)	445 x 330 x 167 mm
Print Speed (Black)	10.8 ipm
Print Speed (Color)	6.0 ipm
Ink Type	Pigment Black, Dye-based Color
Paper Handling	100 sheets (Plain Paper)
Photo Print Speed	Approx. 45 seconds (4 x 6")
Scanning Depth (Input / Output)	24-bit / 24-bit
Copy Speed	Approx. 2.5 ipm
Copy Functions	Borderless Copy
Interface Type	USB 2.0, Wi-Fi
Supported Operating Systems	Windows, macOS
Mobile Printing	Canon PRINT app, AirPrint, Mopria
Paper Types	Plain Paper, Photo Paper Plus Glossy II, Matte Photo Paper, Envelopes
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes (DL, COM10), 4x6, 5x7