18
Changing the Delay Time and Number of Shots
()
1. (Rec.) Menu (Self-timer) .
See Menus and Settings (p. 21).
2. Press the FUNC./SET button.
3. Use the or button to select [Delay] or [Shots] and the
or button to change the setting and press the FUNC./SET
button.
4. Press the MENU button.
This setting cannot be set in some shooting modes.
If the [Shots] option is set to 2 or more shots, the following
occurs.
- The exposure and white balance are locked at the settings
selected for the first shot.
- If the flash is used, the interval between shots lengthens
because the flash must charge.
- The interval between shots may lengthen when the built-in
memory of the camera fills.
- Shooting will automatically cease if the memory card
becomes full.
Î
See the Advanced Guide: Functions Available in Each Shooting Mode (p. 119).
Î
See Selecting a Shooting Mode (p. 11).
To Next Page
Loading...
Need help?
General
