27
Downloading Images to a Computer
2.
Connecting the camera to a computer.
1. Use the supplied interface cable to connect the
computer’s USB port to the camera’s DIGITAL terminal.
Slip your fingernail under the lower end of the camera’s
terminal cover, lift it open and plug the interface cable in all the
way.
2. Press the / button to turn on the
power.
The camera and computer will be able to
communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera’s
DIGITAL terminal.
USB Port
Interface Cable
DIGITAL Terminal
Interface Cable
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.
To Next Page
Loading...
Need help?
General
