17
Shooting
Using the Self-Timer
1. Press the button to cycle through self-timer settings.
• When the shutter button is pressed fully, the self-timer lamp will
blink. When using redeye reduction, the self-timer lamp will blink
and then stay lit for the last 2 seconds.
To cancel the self-timer, press button to select .
Changing the Delay Time
1. (Rec.) Menu (Self-timer) *
1
//.
See Menus and Settings (p. 21).
*1 Default setting.
*2 Default setting.
*3 Default setting is 3 shots.
10 sec. delay: The shutter releases 10 sec. after the shutter
button is pressed.
• 2 sec. before the shutter releases, the self-timer sound beeps
quickly and the lamp will speed up.
2 sec. delay: The shutter releases 2 sec. after the shutter button
is pressed.
• The self-timer sound beeps quickly when the shutter button is
pressed and the shutter will release 2 sec. later.
Custom Timer: You can change the delay time (0–10*
2
, 15, 20, 30
sec.) and number of shots (1–10*
3
) (p. 18).
• When a delay time of over 2 seconds is set for the [Delay] option,
the self-timer sound beeps quickly 2 seconds before the shutter
releases. If multiple shots have been specified for the [Shots]
option, the sound will play for the first shot only.
Each time you press the button,
the self-timer settings will change.
*
*1 Depending on the shooting
mode, may also appear. For
details on how to use , refer
to p. 31 of the Advanced Guide.
To Next Page
Loading...
Need help?
General
