If the icon appears on the LCD, it indicates that Wi-Fi is enabled and the printer is connected to
the wireless router.
Depending on the signal state, the icon will change.
Signal strength: 81 % or more
You can use the printer over Wi-Fi without any problems.
Signal strength: 51 % or more
The problem such as the printer cannot print may occur according to the network status. We recom-
mend placing the printer near the wireless router.
Signal strength: 50 % or less
The problem such as the printer cannot print may occur. Place the printer near the wireless router.
Wi-Fi is enabled but the printer is not connected to the wireless router.
If the icon appears on the LCD, it indicates that the wired LAN is enabled.
Note
• When Wi-Fi, wired LAN, or both are disabled, the icon, icon, or both are not
displayed.
184
To Next Page
Loading...
