Canon VB-C300 User Manual

4-3
Appendix
The viewer is disconnected.
● Check that the network or PC is working property.
● Reboot the PC and reconnect to the camera.
I forgot the password.
● You can initialize all the settings by using the Reset switch (→ P.4-9). The initialized
password is “VB-C300.” However, all the network settings including the IP address and
subnet mask are also initialized and need to be set again.
Troubleshooting

Canon VB-C300 Specifications

General

Brand	Canon
Model	VB-C300
Category	Security Camera
Language	English