82
Specifying Viewable Images
[Select by rating]
Specify viewable images depending on
whether a rating has been added (or not
added) or by the type of rating.
Select a rating, then press <0> to
specify the viewable images.
[File number range] (Select range)
Select the first and last images from
images arranged by the file number to
specify the viewable images.
1 Turn the <5> dial to select the first
image to be set as viewable.
2Press <0> to display the image
selection screen.
Select an image using the <5> dial.
If you press the <u> button and turn
the <6> dial counterclockwise, you
can select an image from the index
display.
3 Select an image and press <0> to
determine the selection.
4 Specify the last image to be set as
viewable by the same operation.
Select an image shot later than the
image selected as the first image.
5 When the first and last images are
specified, select [OK], then press
<0>.
To Next Page
Loading...
Need help?
General
