With most camcorders, even the slightest hand movements will be noticeable
during telephoto recording. However, the ZR50 MC/ZR45 MC’s image stabilizer
allows you to obtain steady recordings even at high magnification.
To turn the image stabilizer off, open the menu and select CAM.SET
UP. Then select IMAGE S. i, set it to OFF and close the menu.
• The i mark disappears from the display when the stabilizer is off.
• The image stabilizer cannot be turned off when the program selector is set to
the [ (Easy Recording) position.
Notes:
• Keep the image stabilizer turned off when the camcorder is mounted on a
tripod.
• The image stabilizer is designed to deal with a normal degree of camcorder
shake.
• The image stabilizer is not as effective as usual during the Low Light and Night
mode.
To Next Page
Loading...
Need help?
General
