8555-M210-O1 Rev R 758C Owner’s 10
KEYPAD FUNCTIONS, CONT.
This is the PRINT/ENTER key. It serves several purposes. First, when
reviewing setup parameters, pressing the PRINT/ENTER key will display the
current setting of the parameter. Second, the PRINT/ENTER key is used to
signal completion of the data entry and causes the indicator to process the
data entered. Third, the PRINT/ENTER key is used to initiate the
transmission of weight and associated data using the selected I/O port.
The 0 through 9 numeric keys are used to enter numeric data
during the setup and calibration as well as during normal
operation of the indicator.
NOTE: The 0 and 1 keys have
dual functions. They are used
to enter numeric data during
setup and calibration as well as
during normal operations and
are also used to select yes or
no to various prompts.
nControl Feature
The 758C includes support for nControl. nControl is
a PC based program that can design a ticket then
download the ticket information to the indicator. The
758C allows 1 programmable format instead of the
ASCII format default ticket.
For more information on nControl, refer to the
nControl Fast Start Guide.
NOTE: If the ID/HEIGHT key is disabled, the appropriate field will be left out when
printing a ticket.
NOTE: The indicator will not respond to pressing the PRINT/ENTER key unless
the weight display is stable. If displaying gross weight, only the gross weight is
printed. If displaying net weight, the gross, tare, and net weights are printed. If
the ID and BMI features are used, their data is printed along with the weight data.
SAMPLE TICKET
Time, mm/dd/yy
ID: xxxxxxxxxxx
BMI: xx.x
Height: xx.x cm
Weight: xxx.xuu G
xxx.xuu T
xxx.xuu N
To Next Page
Loading...
Need help?
General
