10
QUICK START
Setting or changing the temperatures for heating and cooling
Your thermostat is installed with pre−set heating and cooling temperature settings.
You can use these or change them so your home is as warm or as cool as you would
like it to be. These steps will hold the temperature where you set it until you make
another change.
1. Open the door. You will see the word heat or cool on the
screen next to the pre−set temperature, depending on the
mode your system is in. (If the thermostat is in ”auto”
mode, you will see both the heating and cooling set
points. If it’s the first time you’ve used the thermostat, the
mode will say heat.).
2. To change the displayed temperature, press the up or
down button located on the right side until you reach the
desired setting.
3. To change the other temperature setting, press the mode
button on the left. The screen will display the word cool
or heat and the pre−set temperature.
4. Press the up or down button to change the displayed setting. Stop on the
desired setting.
5. Close the door.
To Next Page
Loading...
Need help?
General
