OG-KSAIF-04 Specifications subject to change without notice. 29
FUNCTIONS
TEMPERATURE SET POINT
Once the operation mode is selected, setting the desired indoor temperature set point is
usually desired. To do this, use the dial around the temperature setting number on the main
screen.
FAN SPEED SETTINGS
There are 4 fan speed options available to the user: AUTO, HIGH, MID, and LOW.
NOTE: These speeds are available only when the system is set to the COOL or HEAT
modes. Changing fan speeds is not an option in the AUTO or DRY modes.
The adjustments to the fan speed should be done to improve the comfort of the occupant(s).
TURBO
TURBO is only available after the COOL mode is selected. TURBO is designed to
decrease the time it takes for the space to achieve setpoint by triggering the compressor and
fan to immediately move to a higher speed.
LOUVER CONTROLS
The app provides 2 different louver controls; horizontal and vertical control. The use of these
functions are dependent on the type of fan coil currently installed and if it has a vertical and/
or horizontal louver control. When available, these buttons allow the user to adjust the
direction of the air flow from the motorized veins.
To Next Page
Loading...
Need help?
General
