CAS DB-1H User Manual

10
3. Hold Function (Hold version)
■ Key hold
① Place an item on the platter and then press the HOLD key.
② “ HOLD” is shown on the ③ Average weight is shown on
display. the display.
■ After average weight display 3 time, HOLD function will be release automatically.
■ Auto Hold function
① After weighing item remove ② Use “TARE” key to select
all of the container from the platter, one of Auto Hold function.
press Hold key.
③ Press “Hold” key to save ④ Place an item on the platter.
and exit to normal mode. Then weight display will show “Hold”.
The “Hold” blinks for two times, and then
the average weight blinks continuously.
⑤ After remove the item of the platter, place another item on the platter.
Then display will show average weight again.
If you don’t want use auto-hold function, remove the item and press hold key.
Display shows AH_on. Press tare key. İt will be changed AH_off.
Then press Hold key. Auto-hold function will not operate.
NET NET
NET NET
NET NET

CAS DB-1H Specifications

General

Brand	CAS
Model	DB-1H
Category	Scales
Language	English