14 8305557-R2
USING THE WEIGH SYSTEM
Net (A) + Tare (B) = Gross (C)
3
4
2
2
4 The indicator will be set to zero and the N and T icons
will appear. N indicates only Net weight value and T
indicates Tare mode.
2 Position a pallet (or bin) (Tare weight) on forks and raise
forks. The weight of the pallet (or bin) will show on the
indicator.
1 If required, zero the indicator.
3 Press the "TARE" button.
NOTE: If piece count is enabled, press the "TARE"
button two times.
Net – The weight of the load.
Tare – The weight of an unladen load that is not included (pallet, bin, etc).
Gross – The combined weight of the load and unladen load.
To weigh a load (Net weight) but disregard part of the
load (Tare weight), example being a pallet, perform the
following procedure:
NOTE: The indicator must be in normal weighing mode
prior to performing the following procedure.
Procedure continued on next page
Obtaining Net/Tare/Gross Weight
A
B
C
Unknown Tare Weight Method
To Next Page
Loading...
Need help?
General
