Cascade C Series User Manual

34 8305557-R2
APPENDIX
FK0776.eps
Programming Preset Average Piece Weight (APW) Values
To add (or update or view) preset APW values, (Parameter
"F 37") perform the following procedure:
APW6
APW5
APW4
APW3
APW2
APW1
Preset APWs Designation
1
2
3
4
5
20 Seconds
3 The indicator will show "F 1". Repeatedly press the "ON/
PRINT" button until "F 37" shows.
2 The indicator will show "-F-". Press the "ZERO/OFF"
button.
4 To enter parameter "F 37", press the "ZERO/OFF" button.
5 Use the "ON/PRINT" (next) and "TARE" (previous)
buttons to view each preset APW (49.672 lb. is the
default value). An arrow at the bottom of the screen and
its position, shows which preset APW value is shown.
Press the "ZERO/OFF" button to add (or update) the
value. If only viewing APW values, continue to Step 7.
1 With the indicator powered off, press and hold the "ON/
PRINT" button for approximately 20 seconds.
Record APW values:
APW1
APW2
APW3
APW4
APW5
APW6
Current Preset Value
Press to add
(or update) value
Preset APW
Designation
(APW1 shown)
Toggle using buttons
"ON/PRINT" (next) or
"TARE" (previous)
NOTE: This table is also available on
page 23 and in the Service Manual,
part no. 6910417.

Cascade C Series Specifications

General

Brand	Cascade
Model	C Series
Category	Forklifts
Language	English